Curtain rod made to measure according to customer requirements
Stainless steel curtain rod Ø12mm suitable for our "GS-1" curtain rod system. The curtain rod is custom-made and can be ordered to the millimetre.
In order to be able to process your order professionally, we require the correct specification of the length A in cm as well as the design of the two rod ends left and right.
The dimension (A) refers to the total length A of the curtain rod in cm, not to the window width!
Beforehand, the length range corresponding to length A must be set so that it lies within the selected range!
Further below you will find an example of the ordering process.
Dividing the curtain rod
For logistical reasons, it is necessary to divide the curtain rod centrally or evenly from a certain length.![](https://www.domet.de/media/b2/86/3f/1598453852/Gardinenstangen-Edelstahl_Rohre_Verbindung_400x218.jpg)
Connection for pitch
Due to its own weight, an additional holder is always necessary at the latest at the curtain rod division! Otherwise, we recommend a maximum bracket spacing of 180 cm.
From when is the curtain pole divided?
Here you can see from which lengths the curtain rods are divided:
- 10 - 239 cm : 1-piece / min. 2 brackets
- 240 - 479 cm : 2-part / min. 3 holders
- 480 - 700 cm : 3-part / min. 4 holders
Completion types of the "GS-1" curtain rod system
Depending on the style and location for which the curtain rod is intended, you can select the appropriate end for both sides in the configurator:
![](https://www.domet.de/media/9b/59/c8/1596227032/Gardinenstangen_Edelstahl_Rohre_offen_200x200.jpg)
Open" end
The end type "open" can be used if the curtain rod ends at a wall or the end is not visible for other reasons.(It is not possible to attach our end pieces with this variant).
![](https://www.domet.de/media/a3/b6/4b/1596227045/Gardinenstangen_Edelstahl_Rohre_geschlossen_200x200.jpg)
Closed" end
The "closed" end type can be used if you prefer a purist look for the curtain rod and do not want to fit an end piece.![](https://www.domet.de/media/ef/2f/00/1596227067/Gardinenstangen_Edelstahl_Rohre_Endstueck_200x200.jpg)
End cap "for end piece
The end type "for end piece" is used to mount the DoMeT® curtain rod end pieces.![](https://www.domet.de/media/1a/17/89/1598287585/Gardinenstangen_Edelstahl_Rohre_Winkelstueck_200x200.jpg)
End "for angle piece
The end type "for angle piece" is used to connect two curtain rods by means of an angle piece.
Order example:
The width of your window is 105.8 cm and you want the curtain rod to protrude 20 cm on both sides. 1.
1. calculate the length (A)
Length (A) = 105.8 + 20 + 20 = 145.8 cm
2. select length range (LB)
Length range (LB) = 130 - 149
(Decimal places are neglected or rounded down when selecting the length range).
3.1 Configure product - length (A) in cm
Enter the desired length (A) in cm.
(The length A can have one decimal place (mm)).
3.2 Configure product - Endings left & right
Select the desired finish type per sidefrom
(The length A can have a decimal place for "mm").
Done!
Diameter / System: | Ø16mm - "GS-1 |
---|---|
Material: | Stainless steel V2A - 1.4301 |
Special design: | Yes - no return possible |
Surface: | Ground / Brushed |
Login
14 March 2022 11:16
Durchdachtes System in Top Qualität
Die Gardinenstange ist heute angekommen und ich habe sie sofort montiert. Ich bin sehr zufrieden mit der Qualität und der einfachen Montage. Man sieht dass alles gut durchdacht ist. Vielen Dank
SYSTEM NAVIGATOR
Curtain rod system "GS-1" - Ø12mm
SERVICE is written in capital lettersfor us!
If you have any questions or special requests, you are welcome to contact us by telephone via our service hotline.
We will be happy to advise you personally and find the right solution for you!