Water tap Shut-off valve stainless steel 1/2 inch "Classic

"The individualist Our water columns are made entirely of stainless steel and are therefore rustproof down to the smallest detail. Good workmanship and the solid design ensure many years of durability. We offer our water columns for new installations or for the replacement of your old tap. The elegant design of the water dispenser makes it an eye-catcher in every garden.(The illustration shows configuration examples, not the selected design. ) Standard dimensions of the water dispenser: Height: 1140mm Spout height: approx. 900mm Diameter: 40mm Distance water outlet / column: 250mm Maximum pressure:9 bar - pressure tested up to 12 bar ( normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar ) Type of water inlet / attachment: You can select the desired connection variant in the configurator "top-right". Connection from below Suitable for new installation with water connection from below. Base plate: Ø150mm with 4 holes Ø10mm. Connection: 3/4" internal thread Connection above ground Suitable for new installation above ground. Base plate: Ø150mm with 4 holes Ø10mm. Connection: 3/4" female thread, standard position: Rear. * Height: floor / centre connection 50mm. * You can specify an individual position in the configurator. Connection below ground Suitable for new installation below ground. Base plate: 150x150mm with 4 holes O10mm. Connection: 3/4" internal thread, standard position: rear. *) Depth: floor edge / centre connection (max. 300mm), standard depth: 150mm. ** * You can specify an individual position in the configurator.** You can specify an individual depth in the configurator. Direct connection 3/4". With existing water connection. Connection: 3/4" internal thread - screwed on. Special equipment (optional): You can select the desired water tap in the configurator "top-right". Additional tap Valve for the additional connection of further taps, e.g. for garden hose. The position of the connection is selectable - front, back, right of the spout, left of the spout (seen from the front). Connection column: 1/2" internal thread Connection stop valve: 3/4" external thread. Standard position: rear. * Height: floor / centre connection column, standard height: 350mm. ** Material: Stainless steel 1.4301 * You can specify an individual position in the order area.** You can specify an individual height in the ordering area. Adapter main spout - coupling plug-in systems (universal) Insert for upper main spout with connection for all common plug-in systems. Fits all common plug-in systems Easy assembly due to coin slot Material: stainless steel 1.4301 Adapter main spout - 3/4" external thread Insert for upper main spout with 3/4" external thread. Material: stainless steel 1.4301

Description follows.....

Brings colour into play Timeless design and high-quality materials as the basis for a durable solution Our "Classic" aluminium water dispenser is more than just a water column - it is a statement of quality and durability. With a body made of solid aluminium and connecting elements made of high-quality stainless steel, this product sets standards in terms of stability and durability. The powder coating not only provides an attractive appearance, but also ensures that the water column withstands the elements and still looks like new even after many years. Thanks to the high-quality workmanship and solid design, you can rely on many years of enjoyment from our "Classic" aluminium water dispenser. Whether in the garden, on the patio or in the entrance area - this water column blends harmoniously into any environment and becomes an eye-catcher. To make installation as easy as possible, we offer two universal installation kits depending on the location. This means you can quickly and easily put your new water dispenser into operation and immediately benefit from its elegant design and functionality. (The illustration shows configuration examples, not the selected design and colour). Piped water Unlike conventional water dispensers, our models are not completely filled with water. Instead, they have a flexible hose that is approved for drinking water. This completely prevents the formation of germs and the heating of large quantities of water that stand still for long periods of time. Standard dimensions of the water dispenser: Height: 1000mm Spout height: approx. 910mm Diameter of column: Ø130mm Flange diameter: Ø200mm Maximum pressure: 9 bar - pressure tested up to 12 bar (normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar) Water inlet type: You can select the desired connection variant in the configurator "top right". Bottom connection The water inlet is connected to a flexible hose which protrudes approx. 150 mm. This means you can connect the water dispenser horizontally and then set it up. Connection: 1/2" internal thread Practical hose system for easy installation Rear connection The water inlet is connected to a 3/4" external thread at the rear. You can also attach a coupling for the standard hose connector systems there. Connection: 3/4" external thread Height: 55mm (centre of connection to floor) Connection made entirely of stainless steel Water outlet type: You can select the desired tap in the configurator "top-right". Chrome-plated brass tap "silver" Tap made of chrome-plated brass in a classic design. Water tap connection: IG 1/2" Water outlet connection: AG 3/4"- We offer you an optional matching coupling piece for this thread. Material: Brass Brushed stainless steel double tap Double tap with two valves and quick coupling made of brushed stainless steel. Water tap connection: IG 1/2" Main valve: aerator for clean and quiet outlet Additional valve: Quick-release coupling for the familiar plug-in systems Material: Stainless steel 1.4301 Brushed stainless steel tap Brushed stainless steel tap. Water tap connection: IG 1/2" Water outlet connection: AG 1/2"- We offer an optional coupling piece to match this thread. Material: Stainless steel 1.4301 Polished brass "Gold" tap Polished brass tap in a classic design. Water tap connection: IG 1/2" Water outlet connection: AG 3/4"- We offer you an optional matching coupling piece for this thread. Material: Brass Optional accessories: You can select the desired accessories in the configurator "top right". Storage grid for watering can The storage grid is attached to the water dispenser with 4 high-strength stainless steel rivet nuts. These are pressed into the column by us when ordered. Solid stainless steel Practical filling of the watering can Dimensions: 210x230mm (WxD) Colour of the water dispenser In addition to the standard colour RAL 7016 "anthracite grey", other colours are optionally available.(special colours can be configured as required)

The classic in stainless steel with a top finish Timeless design and high-quality materials as the basis for a durable solution Experience the perfect combination of tradition and innovation with our DoMeT water dispenser, stainless steel "Classic". Made from solid 1.4301 "V2A" stainless steel, it guarantees the highest quality and durability. The welded lid ensures a seamless look and makes the water column a real eye-catcher. Thanks to the manual top finish, our water column has an excellent appearance with a particularly homogeneous surface. Every detail has been worked on with the utmost care to offer you a product of outstanding quality. For maximum installation flexibility, we offer two universal installation kits so that you can install the "Classic" stainless steel water dispenser to suit your needs. (The illustration shows configuration examples, not the selected version). Piped water Unlike standard water dispensers, our models are not completely filled with water. Instead, they have a flexible hose that is approved for drinking water. This completely prevents the formation of germs and the heating of large quantities of water that stand still for long periods of time. Standard dimensions of the water dispenser: Height: 1000mm Outlet height: approx. 910mm Diameter column: Ø130mm Flange diameter: Ø200mm Maximum pressure: 9 bar - pressure tested up to 12 bar (normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar) Water inlet type: You can select the desired connection variant in the configurator "top right". (Water inlet type illustrations do not show the stainless steel version). Bottom connection The water inlet is connected to a flexible hose which protrudes approx. 150 mm. This means you can connect the water dispenser horizontally and then set it up. Connection: 1/2" internal thread Practical hose system for easy installation Rear connection The water inlet is connected to a 3/4" external thread at the rear. You can also attach a coupling for the standard hose connector systems there. Connection: 3/4" external thread Height: 55mm (centre of connection to floor) Connection made entirely of stainless steel Water outlet type: You can select the desired tap in the configurator "top-right". Brushed stainless steel double tap Double tap with two valves and quick coupling made of brushed stainless steel. Water tap connection: IG 1/2" Main valve: aerator for clean and quiet outlet Additional valve: Quick coupling for the familiar plug-in systems (incl.) Material: Stainless steel 1.4301 DoMeT stainless steel tap 1/2 inch "Classic" Industrial tap with DoMeT CNC handle - 100% stainless steel Very reliable and stable Water tap connection: IG 1/2" Water outlet connection: AG 3/4"- We offer you an optional coupling piece to match this thread. Material: Stainless steel 1.4301 Chrome-plated brass tap "Silver" Tap made of chrome-plated brass in a classic design. Water tap connection: IG 1/2" Water outlet connection: AG 3/4"- We offer you an optional matching coupling piece for this thread. Material: Brass Polished brass "Gold" tap Polished brass tap in a classic design. Water tap connection: IG 1/2" Water outlet connection: AG 3/4"- We offer you an optional matching coupling piece for this thread. Material: Brass Optional accessories: You can select the desired accessories in the configurator "top right". Storage grid for watering can The storage grid is attached to the water dispenser with 4 high-strength stainless steel rivet nuts. These are pressed into the column by us when ordered. Solid stainless steel Practical filling of the watering can Dimensions: 210x230mm (WxD)

Maximum flow rate due to 1 inch system Our powder-coated aluminium water columns with 1 inch system have a body made of solid aluminium and connecting elements made of stainless steel. High-quality workmanship, solid construction and a powder coating (colour of your choice) guarantee many years of durability. ( The illustration shows configuration examples, not the selected design and colour. ) Standard dimensions of the water dispenser: Height: 1000mm Spout height: approx. 910mm Diameter column: Ø130mm Diameter flange: Ø200mm Maximum pressure:9 bar - pressure tested up to 12 bar ( normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar ) Type of water inlet: Bottom connection The water inlet is connected to a flexible hose which protrudes approx. 150mm. This allows you to connect the water dispenser horizontally and then set it up. Connection: 1" female thread internal thread Practical hose system for easy installation Type of water tap: You can select the desired water tap in the configurator "top-right". Ball outlet tap brass 18mm Brass water tap with 18mm outlet. Water tap connection: IG 1". Connection water outlet: 1" external thread Material: nickel-plated brass Ball valve brass 1" Ball valve made of brass. Water dispenser connection: 1" female thread Connection water outlet: IG 1" Material: nickel-plated brass Ball valve brass 1" + Geka quick coupling Brass ball valve with Geka quick coupling Water tap connection: 1" female thread Water outlet connection: IG 1" + Geka quick coupling Material: nickel-plated brass Ball valve brass 1" + Storz quick coupling Brass ball valve with Storz quick coupling Connection water dispenser: IG 1" Water outlet connection: IG 1" + Storz quick coupling. Material: nickel-plated brass Without valve Without valve for connection of own 1" fittings Connection of water dispenser: IT 1". Colour of the water dispenser In addition to the standard colour RAL 5005 "Signal blue", further colours are optionally available.( Special colours can be configured as desired)