Water Dispenser Stainless Steel "WZS-1
€388.00
Manufacturing time 14 days + delivery time 1-3 days
"The individualist
(
The illustration shows configuration examples, not the selected design. )
Standard dimensions of the water dispenser:
- Height: 1140mm
- Spout height: approx. 900mm
- Diameter: 40mm
- Distance water outlet / column: 250mm
Maximum pressure:9 bar - pressure tested up to 12 bar
( normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar )
Type of water inlet / attachment:
You can select the desired connection variant in the configurator "top-right".
Connection from below
- Base plate: Ø150mm with 4 holes Ø10mm.
- Connection: 3/4" internal thread
Connection above ground
- Base plate: Ø150mm with 4 holes Ø10mm.
- Connection: 3/4" female thread, standard position: Rear. *
- Height: floor / centre connection 50mm.
* You can specify an individual position in the configurator.
Connection below ground
- Base plate: 150x150mm with 4 holes O10mm.
- Connection: 3/4" internal thread, standard position: rear. *)
- Depth: floor edge / centre connection (max. 300mm), standard depth: 150mm. **
* You can specify an individual position in the configurator.
** You can specify an individual depth in the configurator.
Direct connection 3/4".
With existing water connection.
- Connection: 3/4" internal thread - screwed on.
Special equipment (optional):
You can select the desired water tap in the configurator "top-right".
Additional tap
Valve for the additional connection of further taps, e.g. for garden hose. The position of the connection is selectable - front, back, right of the spout, left of the spout (seen from the front).- Connection column: 1/2" internal thread
- Connection stop valve: 3/4" external thread.
- Standard position: rear. *
- Height: floor / centre connection column, standard height: 350mm. **
- Material: Stainless steel 1.4301
** You can specify an individual height in the ordering area.
Adapter main spout - coupling plug-in systems (universal)
Insert for upper main spout with connection for all common plug-in systems.
- Fits all common plug-in systems
- Easy assembly due to coin slot
- Material: stainless steel 1.4301
Adapter main spout - 3/4" external thread
Insert for upper main spout with 3/4" external thread.
- Material: stainless steel 1.4301
| Material: | Stainless steel V2A - 1.4301 |
|---|---|
| Special design: | Yes - no return possible |
| Special features: | Completely made of stainless steel |
| Surface: | Ground / Brushed |
DOLP-METALL e.K.
Pfarrer-Retzer-Str. 12
93473 Arnschwang
Telefon: +49 (0)9977 9046972
E-Mail: info@domet.de
USt-IdNr.: DE198182480
Schlauchhalter vs. Schlauchaufroller Box
Fundament mit Wasseranschluss
Accessories
Simple and professional Complete mounting kit for setting your own foundation. With this mounting kit, you can easily set a foundation and professionally connect your water dispenser from the underside thanks to the well thought-out pipe routing incl. holder. The enclosed holder allows you to hold the DN50 pipe system in position while you concrete the foundation. The mounting kit contains: 1x DN50 pipe system 1x bracket for DN50 pipe system 4x V4A hanger bolt M8 or M10 4x V4A cap nut M8 or M10 4x V4A washers M10 4x universal dowel (Würth)
Simple and professional Complete mounting kit for setting your own foundation. With this mounting kit, you can easily set a foundation and professionally connect your water dispenser from the underside thanks to the well thought-out pipe routing incl. holder. The enclosed holder allows you to hold the DN50 pipe system in position while you concrete the foundation. The mounting kit contains: 1x DN50 pipe system 1x bracket for DN50 pipe system 4x V4A hanger bolt M8 or M10 4x V4A cap nut M8 or M10 4x V4A washers M10 4x universal dowel (Würth)
Simple and professional Complete mounting kit for setting your own foundation. With this mounting kit, you can easily set a foundation and professionally connect your water dispenser from the underside thanks to the well thought-out pipe routing incl. holder. The enclosed holder allows you to hold the DN50 pipe system in position while you concrete the foundation. The mounting kit contains: 1x DN50 pipe system 1x bracket for DN50 pipe system 4x V4A hanger bolt M8 or M10 4x V4A cap nut M8 or M10 4x V4A washers M10 4x universal dowel (Würth)
Simple and professional Mounting kit for mounting on an existing foundation. With this mounting kit, you can easily mount your DoMeT product with flange plate professionally on an existing foundation. The mounting kit contains: 4x V4A hanger bolt M8 4x V4A cap nut M8 4x V4A washers M8 4x universal dowel (Würth)
