Fundament mit Wasseranschluss

Simple and professional Complete mounting kit for setting your own foundation. With this mounting kit, you can easily set a foundation and professionally connect your water dispenser from the underside thanks to the well thought-out pipe routing incl. holder. The enclosed holder allows you to hold the DN50 pipe system in position while you concrete the foundation. The mounting kit contains: 1x DN50 pipe system 1x bracket for DN50 pipe system 4x V4A hanger bolt M8 or M10 4x V4A cap nut M8 or M10 4x V4A washers M10 4x universal dowel (Würth)

Maximum flow rate due to 1 inch system Our powder-coated aluminium water columns with 1 inch system have a body made of solid aluminium and connecting elements made of stainless steel. High-quality workmanship, solid construction and a powder coating (colour of your choice) guarantee many years of durability. ( The illustration shows configuration examples, not the selected design and colour. ) Standard dimensions of the water dispenser: Height: 1000mm Spout height: approx. 910mm Diameter column: Ø130mm Diameter flange: Ø200mm Maximum pressure:9 bar - pressure tested up to 12 bar ( normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar ) Type of water inlet: Bottom connection The water inlet is connected to a flexible hose which protrudes approx. 150mm. This allows you to connect the water dispenser horizontally and then set it up. Connection: 1" female thread internal thread Practical hose system for easy installation Type of water tap: You can select the desired water tap in the configurator "top-right". Ball outlet tap brass 18mm Brass water tap with 18mm outlet. Water tap connection: IG 1". Connection water outlet: 1" external thread Material: nickel-plated brass Ball valve brass 1" Ball valve made of brass. Water dispenser connection: 1" female thread Connection water outlet: IG 1" Material: nickel-plated brass Ball valve brass 1" + Geka quick coupling Brass ball valve with Geka quick coupling Water tap connection: 1" female thread Water outlet connection: IG 1" + Geka quick coupling Material: nickel-plated brass Ball valve brass 1" + Storz quick coupling Brass ball valve with Storz quick coupling Connection water dispenser: IG 1" Water outlet connection: IG 1" + Storz quick coupling. Material: nickel-plated brass Without valve Without valve for connection of own 1" fittings Connection of water dispenser: IT 1". Colour of the water dispenser In addition to the standard colour RAL 5005 "Signal blue", further colours are optionally available.( Special colours can be configured as desired)

Brings colour into play Our powder-coated aluminium water columns have a solid aluminium body and stainless steel connecting elements. High-quality workmanship, solid construction and powder coating ensure many years of durability. ( The illustration shows configuration examples, not the selected design and colour. ) Standard dimensions of the water dispenser: Height: 1000mm Spout height: approx. 910mm Diameter column: Ø130mm Diameter flange: Ø200mm Maximum pressure:9 bar - pressure tested up to 12 bar ( normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar ) Type of water inlet: You can select the desired connection variant in the configurator "top-right". Bottom connection The water inlet is connected to a flexible hose which protrudes approx. 150 mm. This allows you to connect the water dispenser horizontally and then set it up. Connection: 1/2" internal thread Practical hose system for easy installation Connection at the back The water inlet is connected to a 3/4" external thread at the rear. You can also attach a coupling for the common hose plug-in systems there. Connection: 3/4" external thread Height: 55mm (centre of connection to floor) Connection completely made of stainless steel Type of water outlet: You can select the desired water tap in the configurator "top-right". Water tap chrome-plated brass "Silver Water tap made of chrome-plated brass in classic design. Water tap connection: female thread 1/2". Connection water spout: AG 3/4"- We offer an optional matchingKupplungsstück zu diesem Gewinde. Material: Brass Double tap brushed stainless steel Double tap with two valves and quick coupling made of brushed stainless steel. Connection water tap: IG 1/2". Main valve: jet regulator for clean and quiet outlet Additional valve: Quick coupling for the known plug-in systems Material: stainless steel 1.4301 Water tap brushed stainless steel Water tap made of brushed stainless steel. Connection water tap: female thread 1/2". Water outlet connection: AGM22x1 internal thread- We offer an optional matchingKupplungsstück zu diesem Sondergewinde. Material: Stainless steel 1.4301 Water tap polished brass "Gold Water tap made of polished brass in classic design. Connection water tap: IG 1/2". Connection water spout: AG 3/4"- We offer an optional matchingKupplungsstück zu diesem Gewinde. Material: Brass Colour of the water dispenser In addition to the standard colour RAL 7016 "Anthracite grey", further colours are optionally available.( Special colours can be configured as desired)

"The individualist Our water columns are made entirely of stainless steel and are therefore rustproof down to the smallest detail. Good workmanship and the solid design ensure many years of durability. We offer our water columns for new installations or for the replacement of your old tap. The elegant design of the water dispenser makes it an eye-catcher in every garden.(The illustration shows configuration examples, not the selected design. ) Standard dimensions of the water dispenser: Height: 1140mm Spout height: approx. 900mm Diameter: 40mm Distance water outlet / column: 250mm Maximum pressure:9 bar - pressure tested up to 12 bar ( normal pressure water pipe approx. 6 bar / normal pressure garden pump approx. 4 bar ) Type of water inlet / attachment: You can select the desired connection variant in the configurator "top-right". Connection from below Suitable for new installation with water connection from below. Base plate: Ø150mm with 4 holes Ø10mm. Connection: 3/4" internal thread Connection above ground Suitable for new installation above ground. Base plate: Ø150mm with 4 holes Ø10mm. Connection: 3/4" female thread, standard position: Rear. * Height: floor / centre connection 50mm. * You can specify an individual position in the configurator. Connection below ground Suitable for new installation below ground. Base plate: 150x150mm with 4 holes O10mm. Connection: 3/4" internal thread, standard position: rear. *) Depth: floor edge / centre connection (max. 300mm), standard depth: 150mm. ** * You can specify an individual position in the configurator.** You can specify an individual depth in the configurator. Direct connection 3/4". With existing water connection. Connection: 3/4" internal thread - screwed on. Special equipment (optional): You can select the desired water tap in the configurator "top-right". Additional tap Valve for the additional connection of further taps, e.g. for garden hose. The position of the connection is selectable - front, back, right of the spout, left of the spout (seen from the front). Connection column: 1/2" internal thread Connection stop valve: 3/4" external thread. Standard position: rear. * Height: floor / centre connection column, standard height: 350mm. ** Material: Stainless steel 1.4301 * You can specify an individual position in the order area.** You can specify an individual height in the ordering area. Adapter main spout - coupling plug-in systems (universal) Insert for upper main spout with connection for all common plug-in systems. Fits all common plug-in systems Easy assembly due to coin slot Material: stainless steel 1.4301 Adapter main spout - 3/4" external thread Insert for upper main spout with 3/4" external thread. Material: stainless steel 1.4301